Available in
Material |
Aluminium PVDF coated |
Zinc |
Copper |
Corten |
Thickness |
Min. 0.7mm |
Min. 0.7mm |
Min. 0.6mm |
Min. 0.7mm |
Panel length |
Please consult us at design stage. |
Please consult us at design stage. |
Please consult us at design stage. |
Please consult us at design stage. |
Panel width |
100-485mm. Standard width 485mm. |
100-555mm. Standard width 385 & 555mm. |
100-485mm. Standard width 485mm. |
100-485mm. Standard width 485mm. |
Directions |
Vertical and horizontal. |
Vertical and horizontal. |
Vertical and horizontal. |
Vertical and horizontal. |
Minimum pitch |
1.5 degrees |
3.0 degrees |
1.5 degrees |
1.5 degrees |
System build up
Wall structure |
Must consist of continuous wall studs or top hats at max. 600mm spacing. |
Direct support |
Plywood 17mm structural to AS 2269. |
Underlay |
Fully breathable and waterproofed membrane. |
Fixings |
Fix snap lock clips at max. 300mm centres. Clips to be min. 0.4mm stainless steel. |
Fully designed, build up system
Fully supported cladding system including plywood, membrane, metal and fixings, complete with all flashings, trims and waterproofed details meeting adjoining building materials.
Warranty |
Min. 10 years warranty, covering both material, installation and waterproofing. |
Materials |
Snap lock panels available in materials and colours as above.
For aluminium, must be 3005 alloy with min. H42 temper. Only PVDF coated aluminium, with a primer and min. two layer paint is suitable for this application. |
Manufacture |
ZC Technical’s state-of-the-art machinery has been specifically developed to work with non-ferrous precious metals. Our manufacturing facility has been purpose-built to roll form, fold, curve and pack materials in accordance with the requirements of these type of metals. Only metals formed in ZC Technical’s facility form part of the system to ensure full warranty. |